Extension for external fan BG112
Extension for external fan BG132
Verlängerung für Fremdlüfter BG71
Extension for external fan BG80
Extension for external fan BG90
SEV forced cooling fan BG315
SEV forced cooling fan BG280
SEV forced cooling fan BG250
SEV forced cooling fan BG225
SEV forced cooling fan BG200
SEV forced cooling fan BG180
SEV forced cooling fan BG160
Drive technology equipment
SEVA-tec GmbH is your specialist in the professional drive technology field. The focus is on three-phase motors,
frequency inverters and geared motors. You can order our drives as energy-saving motor(-s) in IE1/ IE2 / IE3
and in IE4. In many cases, electric motors are needed which are designed to match specific requirements
and equipped with the required accessories. In this respect, with our qualified personnel, our large stock of
motors and our own final assembly, we are a perfect partner for businesses that need very different motor designs.
Electronic brake units
Electronic brakes are used to decelerate asynchronous motors with squirrel-cage rotor and 1PH AC capacitor
start motors so that motion is stopped within 10 seconds after the motor is turned off. Brake switches are
available for external installation in 1.1kW, 1.5kW, 2.2kW, 3kW. 4kW, 5.5kW and 7.5kW motors.
Protection by PTC thermistor
Most of the drives offered here are designed and prepared for temperature monitoring using PTC sensors.
To make use of this monitoring function, you need the applicable PTC thermistor triggering device.
Construction type and terminal box
If desired, the construction type of the motors is variable. Even for AC motors in heavy design, i.e. from 4 kW
to 500 kW, the feet of the motor can be modified. Hence, a B3 foot motor can also be converted to a B5 flange
motor or to a B4/B5 foot/flange motor. Another advantage is that the drive system can be modified towards a
system with terminal box at the top, on the left side, on the right side or even at the bottom.
Special motor designs
Here you see a selection of miscellaneous electric motor designs. These are, for example,
electric motors / geared motors with:
- variable speed drive (inverter) mounted on the motor
- external fan
- different voltages
- different frequencies
- degree of protection of IP54, IP55, IP65, IP66
- UL/CSA with certificate
- marine grade steel body
- class of isolation H
- protection roof on the fan hood
- insulated ball bearings
- cable outlet
- special paint
- PTC resistor temperature sensor
- bimetal
- PTC thermistor
- temperature sensor such as PT 100
- bearing temperature monitoring
- heating during stoppage
- terminal box on the left side, right side, topside
- special flange
- special shaft
- second shaft end
- non-oxidizing aluminium fan
- non-oxidizing screws (D 086 DMA)
- rotary encoder
- tachogenerator
- incremental encoder
- NU bearing / fixed bearing
- prestressed bearing
- re-lubrication unit
- particular balancing quality
- motor switch mounted on the motor
SEO= Drive technology equipment - Motor flange, Torque arm, External fan