SEVA- CMRV 090-112M-4 - 4 kW - 7 bis 84 rpm- Worm Gearbox Inverter-motor ED400

worm gear + FU motor ED400, Power= 4 KW, Speed= 7 to 84 rpm

Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530),
Protection class= IP55, iso class= F (155°C), Operating mode= S1, duty cycle= S1- 100%,
hollow shaft= 35mm, motor Speed= 4 pole, translation (i)= 20, torque= 458 Nm,
service factor (f.s.)= 0.8. Terminal box= on top (rotatable), weight= 55 kg, color= RAL 5010 (gentian blue),
temperature sensor= 3 x PTC thermistor, housing= die-cast aluminum, ball bearing= SKF, C&U or equivalent,

Frequency converter
Power= 4 KW, Size= B, Input voltage= 3 x 400V +10% (three-phase), Input frequency= 50/60 Hz,
Output frequency= 0 - 400 Hz, EMC filter= C2, degree of protection= IP65, dimensions= 270mm x 189mm x 140mm,
Mains current (input) = 7.9 A. Ideal control range= 5- 60 Hz, with constant nominal torque, below 30 Hz,
an external fan is required for cooling.

Product information
The frequency converter offers the option of becoming "bus-capable" with the help of fieldbus modules.
With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos, the EASYdrive offers
compatibility with almost all common control environments. The customer can select the bus system relevant
to him and thus ideally integrate the EASYdrive into the control environment of his application. The required
optional control variant must be specified when ordering. The EASYdrive drive controllers are CE, UL and CSA
certified. Without external filter measures, the EASYdrive complieswith EMC class C2 (with 3-phase mains feed)
or C1 (with 1-phase mains feed).

Possible variant selection !

Product selection
When selecting the frequency converter, note that there are 3 variants. This includes the device
in the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.

The "standard frequency converter" shown is fully usable and contains a side-installed
potentiometer, but requires a corresponding control panel for activation.
One of the following options must also be ordered for this:
- External operating/programming device (MMI with cable and plug)
- Interface cable for PC programming    
- Bluetooth adapter

The variant "frequency converter with membrane keyboard" contains a built-in potentiometer and offers the possibility of controlling the
FI directly, such as start-stop, left-right rotation, etc.
For parameterization, you must also one of the following options can also be ordered:
- External operating / programming device (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter

The "frequency converter with MMI control unit" variant does not require an optional control panel,
there is also a display in the device cover. The options mentioned can be used if required.

Important information
This drive is a custom-made product. A withdrawal or revocation of the purchase is excluded!
All product photos are non-binding examples!