DC motor, permanent magnet motor, DC electric motor, power = 0.33 kW, speed = 4 poles, Design= B3, Voltage= 1 x 24 Volt DC, Efficiency= 0.82, Protection class= IP 54, Size= IEC71, Weight= 7.3 kg, Paint finish= unpainted, Insulation class= F, Rated current= 17...

DC motor, permanent magnet motor, DC electric motor, power = 0.25 kW, speed = 6 poles, Design= B5, Voltage= 1 x 24 Volt DC, Efficiency= 0.78, Protection class= IP 54, Size= IEC71, Weight= 7.3 kg, Paint finish= unpainted, Insulation class= F, Rated current= 17...

DC motor, permanent magnet motor, DC electric motor, power = 0.25 kW, speed = 2 poles, Design= B14, Voltage= 1 x 12V DC, Efficiency= 0.77, Protection class= IP 54, Size= IEC71, Weight= 7.3 kg, Paint finish= unpainted, Insulation class= F, Rated current= 27 A,...

Flat motor, 3.0 kW, 2800 rpm, 3 x 230/400 volts, same length with mechanical brake. Right-hand rotation, left-hand thread, clamping flange with 25.4 mm mount, operating mode S6-40% Design= B34, Voltage= 3 x 230/400 V-50 Hz, Protection class= IP55, Weight= 12.4 kg, Terminal box...

EMC-optimized cable 4 x 4.0 mm² between frequency converter and motor, low-capacitance, double-shielded. Shielding consists of an aluminum-clad foil wrapping combined with tinned copper braid. Technical data: Classification ETIM 5: ETIM 5.0 Class ID: EC000057 ETIM 5.0 Class Description: Power cable Classification ETIM 6:...

M25 cable gland brass, EMC-Z - Suitable for shielded control cables up to 4 x 6.0 mm² - for cables with a diameter of 9 mm to 17 mm - Brass cable gland with low-resistance shield contact - Highly conductive, flexible EMC contact spring...

Right-left rotation switch with emergency stop in a plastic housing. Switch not latching. External frequency converter control. Available with 1m, 3m, or 5m cable (wired). Please select the model. All product photos are non-binding examples!

Special flange for electric motors of size 80 Flange B5 in reduced version. Ø160 x 110 x 130 mm, (P x N x M) Hole = 4 x Ø10mm ! Only surcharge - not available separately!

Worm gear motor, power= 0.18 KW, speed= 6 ​​to 67 rpm, Protection class= IP55, Insulation class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Hollow shaft= 14mm, Motor speed= 4 poles, Gear ratio (i)= 25, Torque= 21 Nm, Operating factor (fs)= 1 ....

Frequency converter, 1x 230V, EASYdrive alpha three-phase motor, 0.25 kW three-phase motor Power= 0.25 kW, Speed= 2 poles, Shaft= 11 x 25 mm, Total weight= 7.5 kg, Design = B3, Input voltage = 1 x 230V- 50 Hz, 3 x 265V- 60 Hz (±...

Worm variable speed gear motor, power = 0.55 kW, speed = 27 - 133 rpm, CMRV063, Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection class = IP55, insulation class = F (155°C), operating...

Three-phase motor, power= 2.2/1.5 kW, speed= 2/4 pole, pole-changing, Design= B5, Voltage= 400 Volt, Frequency= 50 Hertz, Finish= RAL 5010 (Gentian Blue), Protection class= IP55, Temperature sensor= 3 x PTC thermistors, weight= 23.2 kg, terminal box position= top, Cable glands= 1 x M25, 1...

Motor in reduced size, power= 2.2kW, speed= 4 poles, Design= B34, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/60 Hertz, Efficiency class= IE3, Efficiency= 86.7%, Paint finish= RAL 5010 (Gentian Blue), Protection class=...

Motor in reduced size, power= 1.5kW, speed= 2 poles, Design= B35, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/60 Hertz, Efficiency class= IE3, Efficiency= 82.7%, Finish= RAL 5010 (Gentian Blue), Protection class= IP55,...

Brake motor option for worm gear motors, with a 1.5 kW, 4-pole motor. Brake = 23 Nm, 230 V, with rectifier. ! Only available in conjunction with the corresponding three-phase gear motor! All product photos are non-binding examples! Technical changes reserved.

Worm gear motor (worm gear - spur gear pre-stage - three-phase motor) Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection class= IP55, Insulation class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%,...

Double worm gear motor (worm gear-worm gear-three-phase motor) Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection class= IP55, Insulation class= F (155°C), Operating mode = S1, Duty cycle = S1- 100%, Hollow shaft=...

Double worm gear motor (worm gear-worm gear-three-phase motor) Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection class= IP55, Insulation class= F (155°C), Operating mode = S1, Duty cycle = S1- 100%, Hollow shaft=...

Double worm gear motor (worm gear-worm gear-three-phase motor) Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Protection class= IP55, Insulation class= F (155°C), Operating mode = S1, Duty cycle = S1- 100%, Hollow shaft=...

Output flange for helical gear reducer KV273, KV275 and KV276. All product photos are non-binding examples! Technical changes reserved.