Forced fan, forced fan unit, motor size 160 Insulation class F, protection class IP56, weight approx. 8 kg, multi-voltage. 1x230 V-50/60 Hz, 85 watts, 0.5/0.35 A, 1490/1730 rpm, x m3/h, capacitor 5µF 3x230/400 V-50/60 Hz, 95/90 watts, 0.62/0.55 A, 1490/1790 rpm, 3x400 V-50/60 Hz,...

Forced fan unit, motor size 112, insulation class F, protection class IP56, multi-voltage 1x230 V-50 Hz, 45 watts, 0.19 A, 2850 rpm, 229 m3/h, capacitor 3µF 1x240 V-60 Hz, 65 watts, 0.28 A, 3350 rpm, 229 m3/h, capacitor 3µF 3x230/400 V-50 Hz, 45 watts,...

Worm gear motor, power= 0.75 KW, speed= 4 to 42 rpm, Protection class= IP55, Insulation class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Hollow shaft= 28mm, Motor speed= 4 poles, Gear ratio (i)= 40, Torque= 147 Nm, Operating factor (fs)= 1.5 ....

Rated operating voltage Ue 12-26 V DC Usage category DC-13 Ue /Ie 12-26 DC / 0.2 A according to IEC/EN 60947-5-2 Voltage output (control range) 0-10 V DC Short-circuit protection device switching element permanent short-circuit and overload proof, pulsing Protection class IIIM UB GND...

Three-phase motor, power= 0.06 kW, speed= 4 poles, Type= B14, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/60 Hertz, Efficiency class= IE1, Paint finish= RAL 5010 (Gentian blue), Protection class= IP55, Temperature sensor=...

Three-phase motor, power= 0.06 kW, speed= 4 poles, Design= B3, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/60 Hertz, Efficiency class= IE1, Paint finish= RAL 5010 (Gentian blue), Protection class= IP55, Temperature sensor=...

Three-phase motor, power= 0.09 kW, speed= 4 poles, Type= B3, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/60 Hertz, Efficiency class= IE1, Paint= RAL 5010 (Gentian Blue), Protection class= IP55, Temperature sensor= 3...

Three-phase motor, power= 0.09 kW, speed= 4 poles, Design= B5, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/60 Hertz, Efficiency class= IE1, Paint finish= RAL 5010 (Gentian blue), Protection class= IP55, Temperature sensor=...

Special flange for electric motors of size 71 Flange B5 in reduced version. Ø140x95x115mm, (P x N x M) Hole = 4 x Ø10mm ! Only surcharge - not available separately!

Special flange for electric motors of size 100 Flange B5 in reduced version. Ø200 x 130 x 165 mm, (P x N x M) Bore = 4 x Ø12mm ! Only surcharge - not available separately!

Special flange for electric motors of size 132 Flange B5 in reduced version. Ø250 x 180 x 215 mm, (P x N x M) Hole = 4 x Ø15mm ! Only surcharge - not available separately!

Special flange for electric motors of size 71 Flange B14 in large version. Ø140 x 95 x 115 mm, (P x N x M) Thread = 4 x M8 ! Only surcharge - not available separately!

Special flange for electric motors of size 90 Flange B14 in large version. Ø160 x 110 x 130 mm, (P x N x M) Thread = 4 x M8 ! Only surcharge - not available separately!

Special flange for electric motors of size 112 Flange B14 in large version. Ø200 x 130 x 165 mm, (P x N x M) Thread = 4 x M10 ! Only surcharge - not available separately!

Special flange for electric motors of size 132 Flange B14 in large version. Ø250 x 180 x 215 mm, (P x N x M) Thread = 4 x M12 ! Only surcharge - not available separately!

Right-left rotation switch with potentiometer and emergency stop in a plastic housing. Switch does not latch. External frequency converter control. Potentiometer connection solder contacts 1 normally open contact each for left and right rotation Housing dimensions in mm (WxHxD): 160x80x55 Color: similar to RAL7035...

M20 cable gland brass, EMC-Z - Suitable for shielded control cables up to 4 x 2.5 mm² - for cables with a diameter of 7 mm to 13 mm - Brass cable gland with low-resistance shield contact - Highly conductive, flexible EMC contact spring...

EMC-optimized cable 4 x 2.5 mm² between frequency converter and motor, low-capacitance, double-shielded. Shielding consists of an aluminum-clad foil wrapping combined with tinned copper braid. Technical data: Classification ETIM 5: ETIM 5.0 Class ID: EC000057 ETIM 5.0 Class Description: Power cable Classification ETIM 6:...

Flat motor, 7.5 kW, 950 rpm, 3 x 400/690 volts, same length with mechanical brake. Right-hand rotation, left-hand thread, clamping flange with 50 mm mount, operating mode S6-60% ED, Design= B3, Voltage= 3 x 400/690 V-50 Hz, Protection class= IP55, Weight= 84 Kg, Terminal...

Flat motor, 2.6 kW, 2800 rpm, 1 x 230 volts, same length with mechanical brake. Right-hand rotation, left-hand thread, clamping flange with 25.4 mm mount, operating mode S6-40% Design= B34, Voltage= 1 x 230 V-50 Hz, Protection class= IP55, Weight= 15.6 kg, Terminal box...