Frekvensomformer motilr ED400B-0300-100L-4

Frekvensomformer, 3x 400V, EASYdrive med elmotor, 3 kW

elmotor
Effekt= 3.0 kW, Hastighed= 4-polets, Aksel= 28 x 60 mm, Total vægt= 33.1 kg,
Type= B3, Input spænding= 3 x 400 V- 50 Hz, 3 x 460 V- 60 Hz (± 5% according til VDE 0530),
Frekvens= 50/60 Hertz, Paint= RAL 5010 (Gentian Blue), Beskyttelsesklasse= IP55,
Temperatursensor= 3 x PTC-termistorer, klemkasse position= tilp, kabinet= die-cast aluminium,
Isoleringsklasse= F (155°C), ball lejer= SKF, C&U, or equivalent, køling= axial ventilator (plastic),

Frekvensomformer
Effekt= 3.0 kW, Størrelse= B, Input spænding= 3 x 400V +10% (three-phase), Input frekvens= 50/60 Hz,
Output frekvens= 0- 400 Hz, EMC filter= C2, Beskyttelsesklasse= IP65, Dimensioner= 270mm x 189mm x 140mm,
Mains current (input) = 6.2 A. Ideal control range = 5- 60 Hz, below 30 Hz an ekstern ventilator is used for køling
needed.

Produkt information
The frekvensomformer offers the mulighed of becoming “bus-capable” using fieldbus modules.
With CANejpen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos, the EASYdrive
Compatibility med almost all common control environments. The kunde can choose the bus system that is relevant for him
and thus ideally integrate the EASYdrive intil the control environment of your application.
The required valgfri control variant must be specified when bestillinging.
The EASYdrive drive controllers are CE, UL, and CSA certified. The EASYdrive can medstand temperatures up til 150°C uden the need for external filtering measures.
the EMC class C2 (for 3-phase mains supply) or C1 (for 1-phase mains supply).

! Possible variant selection !

Produkt selection
When selecting a frekvensomformer, it is important til note that there are three variants. Firstly, the device
in standard version, secondly the device med a membrantastatur and thirdly the device med an MMI-styreenhed.

The “frekvensomformer in standard design” shown is fully usable and contains a side-monteret
Potentiometer, but requires a corresponding styreenhed for control.
Til do this, you must bestilling one of the following muligheds:
- External styreenhed (MMI med kabel and connectilr)
- Interface kabel for PC programming
- Bluetiloth adapter

The variant "Frekvensomformer med membrantastatur" contains a built-in potentiometer and offers the possibility til
Til control the frekvensomformer directly, such as start-stilp, venstre-højre run, etc.
For parameterization, one of the following muligheds must also be bestillinged:
- External styreenhed (MMI med kabel and connectilr)
- Interface kabel for PC programming
- Bluetiloth adapter

The variant "Frekvensomformer med MMI-styreenhed" does not require an valgfri styreenhed,
The device cover also includes a display. The muligheds mentioned above can be used if necessary.

programming
The trefaset motor med integrated EASYdrive frekvensomformer is supplied for safety reasons
not programmed! Should further parameterization be necessary, we offer this adjustment work
at an hourly rate of 86,-€/ net.

Vigtigt instructions
This drive is a custilm-made produkt. Annullerlation or revocation of the purchase is not possible!
All produkt photils are uforpligtende eksempler! Med forbehold for tekniske ændringer.