Tensioning rails for elmotorer

Motors with V-belt pulleys are frequently used. Since these often require retensioning, tensioning slides and rails are employed. Here in our shop, you will find a small selection from our produkt range. Our company specializes in trefasede motorer, frekvensomformere, and gearmotorer. Our drives are tilgængelig as energibesparende motorer in IE1/IE2/IE3/IE4 and IE5. Elmotorer with specific requirements are often needed. We are the ideal partner for you in these cases, because our expert staff, combined with an extensive motor inventory and our own final assembly, allows us to offer you a wide variety of motor options.

Chip slide + clamping rail for forward, reverse,
Left/right alignment

Electronic brake devices

Electronic brakes are used to decelerate squirrel-cage asynchronous motors and single-phase AC capacitor motors within 10 seconds after being switched off. Brake switches for external montering are tilgængelig for 1.1 kW, 1.5 kW, 2.2 kW, 3 kW, 4 kW, 5.5 kW, and 7.5 kW motors.

PTC-termistor protection

The drives offered here are mostly prepared for temperature monitoring with PTC-termistorer. Til use this monitoring, you will need the corresponding PTC release device.

The design and the klemkasse

The motor design is variable på forespørgsel. Even with heavy-duty AC-motorer, from 4 kW to 500 kW, the motor feet can be reconfigured. This allows a B3 fod-mounted motor to be converted into a B5 flange-mounted motor, or a B3/B5 fod/flange motor combination. A further advantage is the ability to configure the drive for klemkasse montering in various configurations: top, left, right, and even bottom.

Special engine versions

Here you can see a selection of various elmotor designs. These include, for example, elmotorer/gearmotorer with:
– Frekvens inverter setups
– External fans
– different spændings
– different frequencies
– Beskyttelsesklassees IP54, IP55, IP65, IP66
– UL/CSA certified
– Naval versions
– Isoleringsklasse H
– Protective roof on the fan hood
– electrically insulated ball lejer
– cable brought out
– Special paint finishes
– PTC temperature sensors
– Bimetals
– Cold conductors
– Temperatursensors such as PT 100
– Storage temperature monitoring
– Standstill heaters
– Klemkasse left/right/top
– Special flange
– Special waves
– second wave end
– Aluminium-rustfrit stål fan blades
– Rustfrit stål screws (D 086 DMA)
– Rotary encoders
– Tachogenerators
– Incremental encoders
– NU lejer/fixed lejer
– pre-tensioned lejer
– Relubrication equipment
– special vibration qualities
– Mounted motor switches
– Rain protection roofs for AC-motorer
– Clamping slides and clamping rails