MV-F273-801-4 - 0.55KW – 2 to 18 rpm helical gear + frekvensomformer motor Alpha

Spur gear + frekvensomformer motor with flange montering option,

Effekt= 0.55 KW, Hastighed= 2 to 18 rpm, Udvekslingsforhold (i)= 96.52, Drejningsmoment (M²)= 339 Nm, Service factor (fs)= 1.3,
Design= B3 (B35 at extra charge), aksel= 35x70 mm, vægt= 36.1 kg, farve= RAL5010,
Temperatursensor = 3 x PTC-termistorer, operating mode = S1- 100% duty cycle.

When bestillinging, please select the desired monteringsposition!

Frekvensomformer
Effekt= 0.55 KW, Størrelse= alpha, Input spænding= 1 x 230V +10% (single-phase), Input frekvens= 50/60 Hz,
Output frekvens= 0- 400 Hz, EMC filter= C2, Beskyttelsesklasse= IP65, Dimensioner= 187mm x 126mm x 80mm,
Mains current (input) = 5.8 A. Ideal control range = 5- 60 Hz, with constant nominal drejningsmoment, below 30 Hz
An external fan is required for køling.

Produkt information
The frekvensomformer offers the option of becoming “bus-capable” using fieldbus modules.
With Modbus (already included) and CANejpen, the EASYdrive alpha offers compatibility with control environments
The required valgfri control variant must be specified when bestillinging.
The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive Alpha operates without external
Filter measures EMC class C2 (for 1-phase mains supply).

! Possible variant selection !

Produkt selection
When selecting a frekvensomformer, it is important to note that there are two variants. Firstly, the device
in standard design and secondly the device with a membrane keyboard. In both versions, a side
built-in potentiometer included.

The “standard version frekvensomformer” shown is fully usable.
but requires a corresponding control unit for control.
Til do this, one of the following options must be bestillinged:
- External control / programming device (MMI with cable and connector)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frekvensomformer with membrane keyboard" offers the possibility of controlling the FU directly,
such as start-stop, left-right-run etc.
For parameterization, one of the following options must also be bestillinged:
- External control / programming device (MMI with cable and connector)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frekvensomformer with MMI control unit" does not require an valgfri control unit,
The device cover also includes a display. The options mentioned above can be used if necessary.

Vigtigt instructions
This drive is a custom-made produkt. Annullerlation or revocation of the purchase is not possible!
All produkt photos are uforpligtende eksempler! Med forbehold for tekniske ændringer.