MV-F202-100-4 - 3.0KW - 31 to 373 rpm spur gear + frekvensomformer motor ED400

Spur gear unit + frekvensomformer motor ED400 with flange montering option from B3 to B35,

Effekt= 3.0 KW, hastighed= 31 to 373 rpm, udvekslingsforhold (i)= 4.50, drejningsmoment (M²)= 89 Nm, service factor (fs)= 1.7.
Design= B3 (B35 at extra charge), aksel= 30x60 mm, vægt= 47.5 kg, farve= RAL5010,
Temperatursensor = 3 x PTC-termistorer.

When bestillinging, please select the desired monteringsposition!

Frekvensomformer
Effekt= 3.0 KW, Størrelse= B, Input spænding= 3 x 400V +10% (three-phase), Input frekvens= 50/60 Hz,
Output frekvens= 0- 400 Hz, EMC filter= C2, Beskyttelsesklasse= IP65, Dimensioner= 270mm x 189mm x 140mm,
Mains current (input) = 6.2 A. Ideal control range = 5- 60 Hz, with constant nominal drejningsmoment, below 30 Hz
An external fan is required for køling.

Produkt information
The frekvensomformer offers the option of becoming “bus-capable” using fieldbus modules.
With CANejpen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos, the EASYdrive
Compatibility with almost all common control environments. The kunde can choose the bus system that is relevant for him
and thus ideally integrate the EASYdrive into the control environment of your application.
The required valgfri control variant must be specified when bestillinging.
The EASYdrive drive controllers are CE, UL, and CSA certified. The EASYdrive can withstand temperatures up to 150°C without the need for external filtering measures.
the EMC class C2 (for 3-phase mains supply) or C1 (for 1-phase mains supply).

! Possible variant selection !

Produkt selection
When selecting a frekvensomformer, it is important to note that there are three variants. Firstly, the device
in standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI control unit.

The “frekvensomformer in standard design” shown is fully usable and contains a side-mounted
Potentiometer, but requires a corresponding control unit for control.
Til do this, you must bestilling one of the following options:
- External control unit (MMI with cable and connector)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frekvensomformer with membrane keyboard" contains a built-in potentiometer and offers the possibility to
Til control the frekvensomformer directly, such as start-stop, left-right run, etc.
For parameterization, one of the following options must also be bestillinged:
- External control unit (MMI with cable and connector)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frekvensomformer with MMI control unit" does not require an valgfri control unit,
The device cover also includes a display. The options mentioned above can be used if necessary.

programming
The trefaset motor with integrated EASYdrive frekvensomformer is supplied for safety reasons
not programmed! Should further parameterization be necessary, we offer this adjustment work
at an hourly rate of 86,-€/ net.

Vigtigt instructions
This drive is a custom-made produkt. Annullerlation or revocation of the purchase is not possible!
All produkt photos are uforpligtende eksempler! Med forbehold for tekniske ændringer.