MV-F002-712-4 - 0.37KW – 20 to 243 rpm helical gear + frekvensomformer motor Alpha

Spur gear unit + frekvensomformer motor with flange montering option,

Effekt= 0.37 KW, hastighed= 20 to 243 rpm, udvekslingsforhold (i)= 6.91, drejningsmoment (M²)= 17 Nm, service factor (fs)= 4.0.
Design= B3 (B35 at extra charge), aksel= 20x40 mm, vægt= 18.8 kg, farve= RAL5010,
Temperatursensor = 3 x PTC-termistorer, operating mode = S1- 100% duty cycle.

When bestillinging, please select the desired monteringsposition!

Frekvensomformer
Effekt= 0.37 KW, Størrelse= alpha, Input spænding= 1 x 230V +10% (single-phase), Input frekvens= 50/60 Hz,
Output frekvens= 0- 400 Hz, EMC filter= C2, Beskyttelsesklasse= IP65, Dimensioner= 187mm x 126mm x 70mm,
Mains current (input) = 4.5 A. Ideal control range = 5- 60 Hz, with constant nominal drejningsmoment, below 30 Hz
An external fan is required for køling.

Produkt information
The frekvensomformer offers the option of becoming “bus-capable” using fieldbus modules.
With Modbus (already included) and CANejpen, the EASYdrive alpha offers compatibility with control environments.
The required valgfri control variant must be specified when bestillinging.
The EASYdrive alpha drive controllers are CE, UL, and CSA certified. The EASYdrive alpha can withstand temperatures up to 150°C without the need for external filtering measures.
EMC class C2 (for 1-phase mains supply).

! Possible variant selection !

Produkt selection
When selecting a frekvensomformer, it is important to note that there are two variants. Firstly, the device
in standard version and secondly the device with a membrane keyboard. In both versions a potentiometer
valgfri to bestilling.

The “standard version of the frekvensomformer” shown is fully usable.
but requires a corresponding control unit for control.
Til do this, you must bestilling one of the following options:
- External control unit (MMI with cable and connector)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frekvensomformer with membrane keyboard" offers the possibility of controlling the FU directly,
such as start-stop, left-right-run etc.
For parameterization, one of the following options must also be bestillinged:
- External control unit (MMI with cable and connector)
- Interface cable for PC programming
- Bluetooth adapter

programming
The trefaset motor with integrated EASYdrive alpha frekvensomformer is delivered for safety reasons
not programmed! Should further parameterization be necessary, we offer this adjustment work
at an hourly rate of 86,-€/ net.

Vigtigt instructions
This drive is a custom-made produkt. Annullerlation or revocation of the purchase is not possible!
All produkt photos are uforpligtende eksempler! Med forbehold for tekniske ændringer.