MV-F273-801-4 - 0.55KW – 2 til 18 rpm helical gear + frekvensomformer motilr Alpha

Cylindrisk gear + frekvensomformer motilr med flange montering mulighed,

Effekt= 0.55 KW, Hastighed= 2 til 18 rpm, Udvekslingsforhold (i)= 96.52, Drejningsmoment (M²)= 339 Nm, Service factilr (fs)= 1.3,
Design= B3 (B35 at extra charge), aksel= 35x70 mm, vægt= 36.1 kg, farve= RAL5010,
Temperatursensor = 3 x PTC-termistorer, drift mode = S1- 100% duty cycle.

When bestillinging, please select the desired monteringsposition!

Frekvensomformer
Effekt= 0.55 KW, Størrelse= alpha, Input spænding= 1 x 230V +10% (single-phase), Input frekvens= 50/60 Hz,
Output frekvens= 0- 400 Hz, EMC filter= C2, Beskyttelsesklasse= IP65, Dimensioner= 187mm x 126mm x 80mm,
Mains current (input) = 5.8 A. Ideal control range = 5- 60 Hz, med constant nominal drejningsmoment, below 30 Hz
An ekstern ventilator is required for køling.

Produkt information
The frekvensomformer offers the mulighed of becoming “bus-capable” using fieldbus modules.
With Modbus (already included) and CANejpen, the EASYdrive alpha offers compatibility med control environments
The required valgfri control variant must be specified when bestillinging.
The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive Alpha operates uden external
Filter measures EMC class C2 (for 1-phase mains supply).

! Possible variant selection !

Produkt selection
When selecting a frekvensomformer, it is important til note that there are two variants. Firstly, the device
in standard design and secondly the device med a membrantastatur. In both versions, a side
built-in potentiometer included.

The “standard version frekvensomformer” shown is fully usable.
but requires a corresponding styreenhed for control.
Til do this, one of the following muligheds must be bestillinged:
- External control / programming device (MMI med kabel and connectilr)
- Interface kabel for PC programming
- Bluetiloth adapter

The variant "Frekvensomformer med membrantastatur" offers the possibility of controlling the FU directly,
such as start-stilp, venstre-højre-run etc.
For parameterization, one of the following muligheds must also be bestillinged:
- External control / programming device (MMI med kabel and connectilr)
- Interface kabel for PC programming
- Bluetiloth adapter

The variant "Frekvensomformer med MMI-styreenhed" does not require an valgfri styreenhed,
The device cover also includes a display. The muligheds mentioned above can be used if necessary.

Vigtigt instructions
This drive is a custilm-made produkt. Annullerlation or revocation of the purchase is not possible!
All produkt photils are uforpligtende eksempler! Med forbehold for tekniske ændringer.