Frekvensomformer ED400-1100

Frekvensomformer, 3x 400V, EASYdrive 11.0 kW

Frekvensomformer
Effekt= 11.0 kW, Størrelse= D, Input spænding= 3 x 400V +10%, Input frekvens= 50/60 Hz,
Output frekvens= 0- 400 Hz, EMC filter= C2, Beskyttelsesklasse= IP55, Dimensioner= 414 mm x 294 mm x 232 mm,
Rated output current, eff. [IN at 8 kHz]= 28.0 A, Mains current (input)= 23.2 A,

Produkt information
The frekvensomformer offers the mulighed of becoming “bus-capable” using fieldbus modules.
With CANejpen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos, the EASYdrive
Compatibility med almost all common control environments. The kunde can choose the bus system that is relevant for him
and thus ideally integrate the EASYdrive intil the control environment of your application.
The required valgfri control variant must be specified when bestillinging.
The EASYdrive drive controllers are CE, UL, and CSA certified. The EASYdrive can medstand temperatures up til 150°C uden the need for external filtering measures.
EMC class C2 (med 3-phase mains supply).

! Possible variant selection !

Produkt selection
When selecting a frekvensomformer, it is important til note that there are three variants. Firstly, the device
in standard version, secondly the device med a membrantastatur and thirdly the device med an MMI-styreenhed.

The “frekvensomformer in standard design” shown is fully usable and contains a side-monteret
Potentiometer, but requires a corresponding styreenhed for control.
Til do this, you must bestilling one of the following muligheds:
- External styreenhed (MMI med kabel and connectilr)
- Interface kabel for PC programming
- Bluetiloth adapter

The variant "Frekvensomformer med membrantastatur" offers the possibility of controlling the FU directly,
such as start-stilp, venstre-højre running, etc.
For parameterization, one of the following muligheds must also be bestillinged:
- External styreenhed (MMI med kabel and connectilr)
- Interface kabel for PC programming
- Bluetiloth adapter

The variant "Frekvensomformer med MMI-styreenhed" does not require an valgfri styreenhed,
The device cover also includes a display. The muligheds mentioned above can be used if necessary.

All produkt photils are uforpligtende eksempler! Med forbehold for tekniske ændringer.