CMRV 110-802-4 - 0.75 KW- 2 til 16 rpm- Snekkegear + frekvensomformer motilr alpha

Snekkegearmotor, effekt= 0.75 KW, hastighed= 2 til 16 rpm,

Beskyttelsesklasse= IP55, Isoleringsklasse= F (155°C), Driftstilstand= S1, Duty cycle= S1- 100%,
Hulaksel= 42mm, monteringsposition M1-M6, motilr hastighed= 4-polets, udvekslingsforhold (i)= 100, drejningsmoment= 322 Nm,
Drift factilr (fs)= 1.5 . Klemkasse= tilp, vægt= 47 kg , farve= RAL 5010 (gentian blue),
Temperatursensor= 3 x PTC-termistorer, Kabinet= grey støbejern, Kuglelejer= SKF, C&U or equivalent,

Please select the desired monteringsposition when bestillinging!

Frekvensomformer
Effekt= 0.75 KW, Størrelse= alpha, Input spænding= 1 x 230V +10% (single-phase), Input frekvens= 50/60 Hz,
Output frekvens= 0- 400 Hz, EMC filter= C2, Beskyttelsesklasse= IP65, Dimensioner= 187mm x 126mm x 80mm,
Mains current (input) = 7.3 A. Ideal control range = 5- 60 Hz, med constant nominal drejningsmoment, below 30 Hz
An ekstern ventilator is required for køling.

Produkt information
The frekvensomformer offers the mulighed of becoming “bus-capable” using fieldbus modules.
With Modbus (already included) and CANejpen, the EASYdrive alpha offers compatibility med control environments
The required valgfri control variant must be specified when bestillinging.
The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive Alpha operates uden external
Filter measures EMC class C2 (for 1-phase mains supply).

! Possible variant selection !

Produkt selection
When selecting a frekvensomformer, it is important til note that there are two variants. Firstly, the device
in standard version and secondly the device med a membrantastatur. In both versions a potentiometer
valgfri til bestilling.

The “standard version of the frekvensomformer” shown is fully usable.
but requires a corresponding styreenhed for control.
Til do this, you must bestilling one of the following muligheds:
- External styreenhed (MMI med kabel and connectilr)
- Interface kabel for PC programming
- Bluetiloth adapter

The variant "Frekvensomformer med membrantastatur" offers the possibility of controlling the FU directly,
such as start-stilp, venstre-højre-run etc.
For parameterization, one of the following muligheds must also be bestillinged:
- External styreenhed (MMI med kabel and connectilr)
- Interface kabel for PC programming
- Bluetiloth adapter

programming
The trefaset motor med integrated EASYdrive alpha frekvensomformer is delivered for safety reasons
not programmed! Should further parameterization be necessary, we offer this adjustment work
at an hourly rate of 86,-€/ net.

Vigtigt instructions
This drive is a custilm-made produkt. Annullerlation or revocation of the purchase is not possible!
All produkt photils are uforpligtende eksempler! Med forbehold for tekniske ændringer.