Please Please register or login to see the price.
Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
4 From 5
No results were found for the filter!
SEVA- special flange B14-big BG100 SEVA- special flange B14-big BG100
Special flange for AC-motors the size 100 Flange B14 in large version. Ø200 x 130 x 165 mm, (P x N x M) screw thread= 4 x M10 only surcharge - not available separately!
SEVA- special flange B14-big BG112 SEVA- special flange B14-big BG112
Special flange for AC-motors the size 112 Flange B14 in large version. Ø200 x 130 x 165 mm, (P x N x M) screw thread= 4 x M10 only surcharge - not available separately!
SEVA- special flange B14-big BG132 SEVA- special flange B14-big BG132
Special flange for AC-motors the size 132 Flange B14 in large version. Ø250 x 180 x 215 mm, (P x N x M) screw thread= 4 x M12 only surcharge - not available separately!
Cable gland brass, M20 EMC-Z Cable gland brass, M20 EMC-Z
M20 cable gland brass, EMV-Z - Suitable for shielded control cables up to 4 x 2.5 mm² - for cables with a diameter of 7 mm to 13 mm - Brass cable gland with low-resistance shield contact - Highly conductive, flexible EMC contact spring -...
Cable gland brass, M25 EMC-Z Cable gland brass, M25 EMC-Z
M25 cable gland brass, EMV-Z - Suitable for shielded control cables up to 4 x 6.0 mm² - for cables with a diameter of 9 mm to 17 mm - Brass cable gland with low-resistance shield contact - Highly conductive, flexible EMC contact spring -...
Cable gland brass, M32 EMC-Z Cable gland brass, M32 EMC-Z
M32 cable gland brass, EMV-Z - Suitable for shielded control cables up to 4 x 10.0 mm² - for cables with a diameter of 11 mm to 21 mm - Brass cable gland with low-resistance shield contact - Highly conductive, flexible EMC contact spring...
Cable gland brass, M40 EMC-Z Cable gland brass, M40 EMC-Z
M40 cable gland brass, EMV-Z - Suitable for shielded control cables up to 4 x 25.0 mm² - for cables with a diameter of 19 mm to 28 mm - Brass cable gland with low-resistance shield contact - Highly conductive, flexible EMC contact spring...
Cable gland brass, M50 EMC-Z Cable gland brass, M50 EMC-Z
M50 cable gland brass, EMV-Z - Suitable for shielded control cables up to 4 x 35.0 mm² - for cables with a diameter of 27 mm to 35 mm - Brass cable gland with low-resistance shield contact - Highly conductive, flexible EMC contact spring...
Manual release lever for brake motors Manual release lever for brake motors
Hand release lever for mechanical release of the brake. The picture shows a complete engine with lever. All product photos are non-binding examples! not individually orderable! Only in conjunction with JS brake motor.
SEVA- PTC triple 130°C SEVA- PTC triple 130°C
PTC triple, for the motor winding. For size 71 to 132 motors. Machine protection with standard pill d = 3mm, in the reinforced shrink tube 3.5 / 1.6, Supply line: 500 / 180-180 / 500 mm, blue / blue, connection ends: jacket plucked...
SEVA- PTC triple 130°C SEVA- PTC triple 130°C
PTC triple, for the motor winding. For size 160 to 315 motors. Machine protection with standard pill d = 3mm, in the reinforced shrink tube 3.5 / 1.6, Supply line: 500 / 180-180 / 500 mm, blue / blue, connection ends: jacket plucked...
SEVA- PTC triple 155°C SEVA- PTC triple 155°C
PTC triple, for the motor winding. For size 71 to 132 motors. Machine protection with standard pill d = 3mm, in the reinforced shrink tube 3.5 / 1.6, Supply line: 500 / 180-180 / 500 mm, blue / black, connection ends: jacket plucked...
4 From 5

Accessories for motors and gearboxes

Here you have the possibility to make use of our great choice of accessories to make your motor complete. You will find here, for example, the suitable torque support, double shaft, heating during stoppage, motor shaft, motor flange, thermal sensor, etc., for you drive system.


Electronic brake units

Electronic brakes are used to decelerate asynchronous motors with squirrel-cage rotor and 1PH AC capacitor start motors so that motion is stopped within 10 seconds after the motor is turned off. Brake switches are available for external installation in 1.1kW, 1.5kW, 2.2kW, 3kW. 4kW, 5.5kW and 7.5kW motors.


Protection by PTC thermistor

Most of the drives offered here are designed and prepared for temperature monitoring using PTC sensors. To make use of this monitoring function, you need the applicable PTC thermistor triggering device.


Construction type and terminal box

If desired, the construction type of the motors is variable.  Even for AC motors in heavy design, i.e. from 4 kW to 500 kW, the feet of the motor can be modified. Hence, a B3 foot motor can also be converted to a B5 flange motor or to a B4/B5 foot/flange motor. Another advantage is that the drive system can be modified towards a system with terminal box at the top, on the left side, on the right side or even at the bottom.


AC motors of special designs

Here you see a selection of miscellaneous electric motor designs. These are, for example, electric motors / geared motors with:
- variable speed drive (inverter) mounted on the motor
- external fan
- different voltages
- different frequencies
- degree of protection of IP54, IP55, IP65, IP66
- UL/CSA with certificate
- marine grade steel body
- class of isolation H
- protection roof on the fan hood
- insulated ball bearings
- cable outlet
- special paint
- PTC resistor temperature sensor 
- bimetal
- PTC thermistor
- temperature sensor such as PT 100
- bearing temperature monitoring
- heating during stoppage
- terminal box on the left side, right side, topside
- special flange
- special shaft
- second shaft end
- non-oxidizing aluminium fan
- non-oxidizing screws (D 086 DMA)
- rotary encoder
- tachogenerator
- incremental encoder
- NU bearing / fixed bearing
- prestressed bearing
- re-lubrication unit
- particular balancing quality
- motor switch mounted on the motor

SEO= Accessories for geared + electric motors, Accessories for motors and gearboxes

Viewed